Share Depth Setting

Share Depth Setting

Follow the instructions on page 3.1 to set drawbar height and hitch up to tractor.
Disable tractor to separator P.T.O. whilst making adjustments in this area of the machine.
- Measure the visible section of the ram piston (Fig 3.9.1) and turn adjuster screw (Fig 3.9.2) to set this dimension to 127mm.
- Connect the hydraulic Feed and Return hoses as described on page 3.3. Run the tractor engine to activate the hydraulic system.
- Follow the relevant instructions on page 4.2 - (Auto depth) to set required share depth.

A trial run should be made when the machine is in the field to assess the depth of finished seed bed behind the separator.
Further Auto depth adjustment can be made until the desired bed depth is achieved