Our Bed Tiller range also comes with the option of added attachments. From Bed Maker ploughs, to hoods and rollers, these can make your machine increasingly suited to the ground being worked.
Classic Style Ploughs
Leaves a wide bottom trench for the stones and clods to lie in. Also leaves a bed that is quicker to dry.
Chateau Style Ploughs
The Chateau style ploughs adopt the classic duck foot point but have steeper and longer mouldboards to leave a very tidy, deep and straight trench. The stones and clod then lie in this trench.
- KIT-1119 (AR) Per Plough
- KIT-1116 (AR+) Per Plough
ScanStone Bed Tiller with Auto Reset Classic Ploughs
ScanStone 4 Body Auto Reset Chateau Ploughs
Vegetable Hoods
These covering hoods are designed only to attach to the rear of the bed tiller and leave a shaped bed for planting roots directly into the bed, where destoning is not used. There are 2 depths of plough available which sit underneath the hood.
- BOM-0345 3.6m Width
- BOM-0326 5.4m Width
- BOM-0341 6.0m Width
Alberta-Style Hoods
These Alberta-style hoods attach to the rear of the tiller and leave 6 hills, neatly formed by stainless steel hoods for planting directly into. This is for using when a destoner is not needed.
- BOM-0379 3.6m Width
- BOM-0380 5.4m Width
ScanStone Bed Tiller with Vegetable Hoods
ScanStone Bed Tiller with Alberta - Style Hoods
Mini Ploughs
When mini ploughs are used as an attachment to the bed tiller, it leaves a non-compacted bed for vegetables. The mini plough does a similar job to the covering hoods, but leaves the bed untouched apart from a levelling bar to level the top.
- KIT-1515 2 Ploughs
- KIT-1516 4 Ploughs
Rollers
The rollers on the back of the bed tillers are designed to follow the machine after carrying out a general cultivation / rotovating pass on the land. There are 4 different variations of the roller attachments shown below each having been designed for different uses. Different rollers can work for different grounds depending on following crops and varying moisture levels.
Cage Rollers
- 3.6m Width
- 5.4m Width
Spike Roller
- 3.6m Width
- 5.4m Width
Packer Roller
- 3.6m Width
- 5.4m Width
Spiral Roller
- 3.6m Width
- 5.4m Width